This Switch 2 sequel accessory was a few millimeters away from being good

Crkd’s $99.99 Nitro Deck 2 has some improvements, with Switch and Switch 2 compatibility, but it’s far from essential.

If you buy something from a link, The Verge may earn a commission. See our ethics statement.

Photo: Cameron Faulkner / The Verge
Cameron Faulkneris an editor covering deals and gaming hardware. He joined in 2018, and after a two-year stint at Polygon, he rejoined The Verge in May 2025.

The Crkd <a href="https://www.polygon.com/reviews/23870523/nitro-deck-nintendo-switch-review/” rel=”nofollow noopener” target=”_blank”>Nitro Deck was a saving grace for the original Nintendo Switch. The slide-on $59.99 accessory brought Hall effect sticks to drift-plagued consoles — no need to open up your Joy-Con for a complicated repair. The Nitro Deck 2, made for both the original Switch and the larger Switch 2, continues the tradition of having better sticks than what Nintendo puts in even the newest Joy-Con (though these aren’t Hall effect or TMR). But it doesn’t feel as essential, and there’s one thing I really can’t stand about it.

It’s too difficult to use the Nitro Deck 2’s ABXY face buttons without the right stick getting in the way. The stick-to-button arrangement is a big step down from the original Nitro Deck (and especially bad compared with the symmetrical Steam Deck-like stick layout in the video output-ready Nitro Deck Plus). I’m surprised Crkd’s team thought this was an improvement. My patience with the run-based gameplay in Echo Weaver is already tested enough, and trying to quickly hammer inputs on the Deck 2 only adds to the frustration.

Your preference may differ, but I like having a little breathing room between the right stick and the face buttons. Some companies choose to space them out or, in the case of the Switch 2’s Joy-Con, make the stick small enough to allow my thumb to hover over it so I can press the buttons. The Deck 2 makes me adjust my thumb’s angle of approach outside of what’s comfortable. It’s just a few millimeters off.

The original’s superior slide-in design was traded for a vice-grip design to ensure compatibility with both the newer and older Switch consoles. The Deck 2 has a twisting mechanism on the back that you can loosen, tighten, or lock. It’s clever, though the tradeoff for broader compatibility is a design that feels inherently less secure. Crkd is asking Switch 2 owners to put a ton of faith in this mechanism staying tight around their $500 consoles. My Switch 2 didn’t feel wobbly during testing, but I’d rather not have to think about its safety at all when I’m gaming. I would have preferred a slide-in design for the Deck 2 made expressly for the Switch 2.

It’s disappointing that Crkd’s Joy-Con-replacing solution isn’t as good because I like some things about it more than the original. For instance, the accessory has adjustable tension on both sticks, so they can snap back to their original position faster or slower than the default speed. Also, the accessory’s bulkier design makes the console more comfortable in my medium-size hands to use in handheld mode. It also has a bunch of customizable buttons: four on its back and an extra near the triggers.

Not many similar accessories are out there yet, and the other one I tried (the abxylute N6) wasn’t all that good, either. I plan to test Mobapad’s latest take on Joy-Con soon, and it seems promising. Alternatively, you can add a bunch of comfort to your Switch 2 in handheld mode with either the Dbrand Killswitch 2 or the Mechanism Basecase. And with the money left over, you could buy a good wireless Switch 2 controller with long-lasting sticks and better rumble.

$80$10020% off
$80
$80 at Amazon$100 at Crkd

Photography by Cameron Faulkner / The Verge

Follow topics and authors from this story to see more like this in your personalized homepage feed and to receive email updates.