Farer’s Field Watch Series III puts a colourful spin on the dark-coated tool watch
- Farer’s Field Watch Series III introduces a redesigned 40mm stainless-steel case with 150m water resistance.
- The Lomond III and Pembroke III are joined by navy PVD-coated Midnight editions with fully luminous aquamarine and orange sorbet dials.
- The Sellita SW221-2 Power+ brings approximately 65 hours of power reserve while retaining the collection’s pointer date display.
Field watches tend to stick to a fairly predictable formula. Dark dial, clear numerals, lots of lume, and colours that wouldn’t look out of place on military surplus. Farer has never been particularly interested in following that rulebook, and its new Field Watch Series III is perhaps the clearest example yet. The familiar Lomond and Pembroke return for a third generation, but they’re now joined by two Midnight versions that take the idea of a dark-coated field watch somewhere considerably more colourful. Aquamarine and orange sorbet probably aren’t the first colours you’d associate with something designed for the outdoors, which is precisely why they work so well here.
It comes shortly after the rose gold PVD-coated, Eisenkiesel-dialled Stratton II Moonphase, although the Field Watch Series III takes Farer back into much more practical territory. There are echoes of the Pilot Collection Series II, too, particularly in the use of coloured cases, although Farer has chosen stainless steel in place of titanium this time around. More importantly, this isn’t simply a new set of colours wrapped around the previous Field Watch.
The 40mm case has been redesigned from the ground up, measuring 11.7mm thick and a fairly compact 44mm from lug to lug. Farer has rounded the sides and reduced the bezel width, allowing the dial to occupy more of the available space. On paper, that 44mm lug-to-lug should also keep the watch fairly manageable despite the relatively broad dial.
The case itself is machined from a solid block of 316L stainless steel, with the movement holder incorporated directly into the main body rather than fitted as a separate component. Farer describes it as a monobloc construction. More attention has also been paid to the finishing. The barrelled case sides are vertically brushed, with polished chamfers running along their edges, while the bezel gets a diamond-knurled perimeter. It adds a little more detail without turning what is still fundamentally a field watch into something overly decorative.
A screw-in crown features Farer’s familiar solid bronze cap, complete with the embossed ‘A’, and the watch is rated to 150 metres of water resistance. Up top is a flat sapphire crystal treated with six layers of anti-reflective coating on its underside. With water resistance, compact dimensions, and two supplied straps, Farer has covered most of the practical stuff you’d want from this sort of watch.
The Pembroke III remains the lighter and more traditional-looking member of the collection. Its ivory dial takes inspiration from early military wristwatches, many of which used white dials before black became the dominant choice. Farer has made the entire dial luminous using Grade X1 Super-LumiNova, with navy numerals and markers printed over the top. Matte navy sword hands continue the colour scheme, accompanied by a lollipop seconds hand filled with white BGW9 Super-LumiNova.
The Lomond III goes in the opposite direction with a gravel-textured navy dial and custard yellow hour markers. Its layout uses a triangle at 12 o’clock alongside large numerals at three, six and nine, with each marker heavily filled with X1 Super-LumiNova. Battleship grey sword hands sit over the top, while the red tip of the seconds hand supplies the small hit of colour that Farer rarely seems able to resist.
The Lomond Midnight and Pembroke Midnight take their respective dial layouts and place them inside navy PVD-coated versions of the new steel case. So far, so tactical. The dials rather quickly put an end to that. The Lomond Midnight gets a fully luminous aquamarine dial, while the Pembroke Midnight goes bright orange – or “orange sorbet”, in Farer’s words. Both use Grade X1 Super-LumiNova across the dial, with matte navy sword hands and markers providing contrast, alongside a lollipop seconds hand filled with BGW9 Super-LumiNova.
Compared with something like the black-and-khaki Hamilton Khaki Field COD, Farer’s interpretation of a dark field watch is considerably less serious. The navy case still gives both Midnight models that tool-watch base, but those glowing dials are about as far from stealthy as you could get.
All four watches keep one of the Farer Field Watch’s more unusual details: its pointer date. A fourth centrally mounted hand points towards a date scale around the sloping chapter ring, keeping the main portion of the dial free from a conventional date aperture. Farer also highlights the final four days of the month in a contrasting colour, reminding you that you may need to correct the display at the end of shorter months. It adds a bit more information to what would otherwise be a very simple field-watch layout, but it has become a recognisable part of this collection by now.
There’s a more substantial upgrade underneath, too. Farer has moved to Sellita’s SW221-2 Power+, increasing the power reserve from around 41 hours in the previous generation to approximately 65 hours. Sellita has achieved that through changes to the gear train, barrel, mainspring and regulation system, with Farer also claiming improvements to winding efficiency and timekeeping stability. There’s a bespoke Farer rotor fitted to the movement as well, although you won’t actually get to see it. Each watch comes on a genuine navy sailcloth strap, and buyers can also choose a second strap in leather, suede or rubber.
Plenty of brands make a dark-toned field watch, and plenty make brightly coloured watches, but combining a navy PVD case with an aquamarine or orange fully luminous dial is very Farer. The more restrained Lomond and Pembroke are still there if you want something closer to the traditional formula, while the new case and 65-hour movement give the whole collection a worthwhile technical update. But if you’re going to buy a Farer, I suspect many will be tempted by the versions that look the most like one.
Farer Field Watch Series III pricing and availability
The Farer Field Watch Series III is available to preorder from the Time+Tide Shop and the Time+Tide Studio in London. Price: £995/US$1,150/€1,280 (Lomond III), £1,050/US$1,195/€1,280 (Pembroke III), £1,095/US$1,250/€1,335 (Lomond Midnight and Pembroke Midnight)
| Brand | Farer |
| Models | Field Watch Series III: Lomond III, Pembroke III, Lomond Midnight, Pembroke Midnight |
| Case Dimensions | 40mm (D) x 11.7mm (T) x 44mm (LTL) |
| Case Material | 316L stainless steel, navy PVD coating on Midnight models |
| Water Resistance | 150 metres |
| Crystal | Flat sapphire front, six layers of internal anti-reflective coating |
| Dial | Lomond III: gravel-textured navy, custard yellow luminous markers
Pembroke III: fully luminous ivory Lomond Midnight: fully luminous aquamarine Pembroke Midnight: fully luminous orange sorbet |
| Lug Width | 20mm |
| Straps | Navy genuine sailcloth plus a second strap chosen from leather, suede or rubber, pin buckle closure |
| Movement | Sellita SW221-2 Power+, automatic |
| Power Reserve | 65 hours |
| Functions | Hours, minutes, sweep seconds, quick-set pointer date, hacking seconds |
| Availability | Available to pre-order from the Time+Tide Studio in London |
| Price | Lomond III: £995 / $1,150 USD / €1,280
Pembroke III: £1,050 / $1,195 USD / €1,280 Midnight models: £1,095 / $1,250 USD / €1,335 |